📡Helpful Info

This info is good for beginners and regulars

Be advised, upon entering the server for the first time, you will be required to create your character. Take this seriously as it will be hard to change afterwards. Keep in mind, we do offer the ability to have 2(two) characters. When registering your character: 1. Please make sure the first and last name begin with a capital letter. 2. Birthday should be entered like the example given when choosing birthday. 3. Height should be entered like the example given without including the "cm" 4. Make sure to head to a bank to get your account situated and head to Phone Store to purchase a phone 5. The server uses "Third Eye" for all interactions. Meaning when you press Alt on your keyboard an eye will pop up in front of you. You will use this eye to interact with just about everything.

To use Bendpak lifts, approach the lift, it will prompt you to Press E, go ahead and Press E. A controller will pop up bottom left on your screen with Arrow up and Arrow down, select which way you need and it go up or down depending what you select. Press escape to back out of lift controller.

To Attach A Vehicle Onto A Trailer So It Does Not Move, Simply Drive or Place The Vehicle On Trailer And Press E. It Will Attach However You Place It and You Can Attach More Than One Vehicle As Long As The Trailer Is Big Enough. For Towing: F𝐥𝐚𝐭𝐛𝐞𝐝s: [𝗘] - 𝗔𝘁 𝗯𝗲𝗱 𝘁𝗼 𝗮𝘁𝘁𝗮𝗰𝗵 / 𝗱𝗲𝘁𝗮𝗰𝗵 𝘃𝗲𝗵𝗶𝗰𝗹𝗲 (𝘂𝘀𝗲𝗮𝗯𝗹𝗲 𝗶𝗻 𝘃𝗲𝗵𝗶𝗰𝗹𝗲 𝗼𝗻 𝗯𝗲𝗱 𝗮𝘀 𝘄𝗲𝗹𝗹) [𝗟𝗲𝗳𝘁𝗔𝗿𝗿𝗼𝘄] - 𝗔𝘁𝘁𝗮𝗰𝗵, 𝗪𝗶𝗻𝗱 𝘄𝗶𝗻𝗰𝗵 [𝗥𝗶𝗴𝗵𝘁𝗔𝗿𝗿𝗼𝘄] - 𝗨𝗻𝘄𝗶𝗻𝗱 𝘄𝗶𝗻𝗰𝗵 [𝗨𝗽𝗔𝗿𝗿𝗼𝘄] - 𝗥𝗮𝗶𝘀𝗲 𝗕𝗲𝗱 (𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗰, 𝗰𝗹𝗶𝗰𝗸 𝗼𝗻𝗰𝗲) [𝗗𝗼𝘄𝗻𝗔𝗿𝗿𝗼𝘄] - 𝗟𝗼𝘄𝗲𝗿 𝗕𝗲𝗱 (𝗮𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗰, 𝗰𝗹𝗶𝗰𝗸 𝗼𝗻𝗰𝗲) [𝗚] - 𝗥𝗲𝗺𝗼𝘃𝗲 𝗥𝗼𝗽𝗲

𝐅𝐨𝐫 𝐑𝐎𝐋𝐋𝐈𝐍𝐆 𝐛𝐞𝐝𝐬: 𝟭. 𝗟𝗼𝘄𝗲𝗿 𝗯𝗲𝗱 𝟮. 𝗘𝗻𝘀𝘂𝗿𝗲 𝘁𝗵𝗲 𝘃𝗲𝗵𝗶𝗰𝗹𝗲 𝗶𝘀 𝗯𝗲𝗵𝗶𝗻𝗱 𝘁𝗵𝗲 𝘁𝗿𝘂𝗰𝗸 𝗰𝗹𝗼𝘀𝗲 𝘁𝗼 𝘁𝗵𝗲 𝗯𝗲𝗱 𝟯. 𝗣𝗿𝗲𝘀𝘀 𝗟𝗲𝗳𝘁 𝗔𝗿𝗿𝗼𝘄 𝗻𝗲𝘅𝘁 𝘁𝗼 𝘁𝗵𝗲 𝗳𝗹𝗮𝘁𝗯𝗲𝗱 𝘁𝗿𝘂𝗰𝗸 𝗯𝗼𝗱𝘆 𝘁𝗼 𝗮𝘁𝘁𝗮𝗰𝗵 𝘁𝗵𝗲 𝘄𝗶𝗻𝗰𝗵 𝟰. 𝗣𝗿𝗲𝘀𝘀 𝗟𝗲𝗳𝘁 𝗔𝗿𝗿𝗼𝘄 𝗮𝗴𝗮𝗶𝗻 𝘁𝗼 𝘄𝗶𝗻𝗱 𝘁𝗵𝗲 𝘄𝗶𝗻𝗰𝗵 𝟱. 𝗣𝗿𝗲𝘀𝘀 𝗘 𝘄𝗵𝗲𝗻 𝘁𝗵𝗲 𝘃𝗲𝗵𝗶𝗰𝗹𝗲 𝗶𝘀 𝗢𝗡 𝘁𝗵𝗲 𝗯𝗲𝗱. 𝗜𝗳 𝘁𝗵𝗲 𝘃𝗲𝗵𝗶𝗰𝗹𝗲 𝗶𝘀 𝗶𝗻𝘀𝗶𝗱𝗲 𝘁𝗵𝗲 𝗯𝗲𝗱, 𝗼𝗿 𝘁𝗼𝗼 𝗵𝗶𝗴𝗵, 𝗽𝗿𝗲𝘀𝘀 𝗘 𝘁𝗼 𝗱𝗶𝘀𝗰𝗼𝗻𝗻𝗲𝗰𝘁 𝘁𝗵𝗲𝗻 𝗘 𝗮𝗴𝗮𝗶𝗻 𝘁𝗼 𝗿𝗲𝗰𝗼𝗻𝗻𝗲𝗰𝘁 𝘁𝗵𝗲 𝗰𝗮𝗿.

𝐅𝐨𝐫 𝐒𝐭𝐚𝐭𝐢𝐜 𝐛𝐞𝐝𝐬: 𝟭. 𝗘𝗻𝘀𝘂𝗿𝗲 𝘁𝗵𝗲 𝗰𝗮𝗿 𝗶𝘀 𝗯𝗲𝗵𝗶𝗻𝗱 𝘁𝗵𝗲 𝘁𝗿𝘂𝗰𝗸. 𝟮. 𝗣𝗿𝗲𝘀𝘀 𝗘 𝗻𝗲𝘅𝘁 𝘁𝗼 𝘁𝗵𝗲 𝘁𝗿𝘂𝗰𝗸, 𝗼𝗿 𝗶𝗻𝘀𝗶𝗱𝗲 𝘁𝗵𝗲 𝗰𝗮𝗿.

For boat trailers: 1. Make sure the trailer is attached to a truck 2. Ensure the trailer is about same size of boat 3. Back trailer into water, enough to where water barely covers the trailer 4. Mount the boat and Press G to attach to trailer To unload, press G to detach